Span 35m L Type Gantry Crane 50T Rail Mounted Quay Crane

Product Description

Span 35m L Type Gantry Crane 50T Rail Mounted Quay Crane
 
L Type Gantry Crane is supported on the ground track by two legs of the bridge.In the structure by the door frame, cart operation mechanism, lifting trolley and electrical components.Some gantry cranes only have a leg on one side, the other side of the plant or trestle support in the operation, known as a semi-gantry crane.Gantry crane door frame part of the bridge (including the main beam and end beam), legs, beams and other parts of the lower beam.

L Type Gantry Crane superiority
 
1. The door frame adopts a box-shaped double beam welding structure, which increases the working space and is convenient for transportation, installation and maintenance;
 
2. The trolley is conductive with special-shaped steel rails and flexible cables;
 
3. Standardization, serialization and generalization of parts and components;
 
4. The power supply of gantry crane has cable reel type and sliding contact line type, which can be selected by users;
 
5. The control room has a wide view, flexible control operation and comfortable work. Fans, air conditioners, walkie-talkies, etc.
 
Can also be added according to requirements;.
 
Product structure design
 
1. Operation mechanism of Crane
It is mainly composed of the lower beam and the trolley, among which the trolley is composed of the active wheel group and the driven wheel group, and the operating mechanism includes the motor, reducer, gear and wheel group and other components.
2. The leg
Using section steel as the material, and then welded into a cage structure, the lower end and the lower beam connection, the upper end and the main beam bolts through the flange connection.
3. The cabin room
The frame is made of section steel, the shell is welded on the frame with thin steel plate.
 
The driver's cab is sealed with broken lines, and the electrical appliances, power distribution cabinets and circuits of the control mechanism are generally located in the driver's room.
4. The main girder
Section steel is welded to the steel plate, generally welded into a truss triangle, on the main beam, and trolley running rail.
5. Trolley operation mechanism
The main components are similar to the running mechanism of the big car.
 
The motor is driven by the reducer, and the small gear on the reducer is transferred to the big gear, so as to realize the round trip of the small car.
6. Lifting mechanism
Is installed in the trolley frame, through the hoist and matching fixed pulley, movable pulley or hook to achieve lifting movement.
 

 
Technical parameters